Fluid Loss Control Performance And Application Advantages Of CMC HV in High-Temperature Wells

Nov 12, 2025

Leave a message

Introduction

High-temperature, high-pressure (HPHT) wells require reliable drilling fluid additives that can maintain performance under extreme conditions. Traditional fluid loss control agents often degrade at elevated temperatures, leading to wellbore instability and poor drilling efficiency. CMC HV (high-viscosity sodium carboxymethyl cellulose, degree of substitution 0.7–0.9) offers excellent thermal stability and superior fluid loss control, making it an essential additive for high-temperature drilling operations.

Core Advantages of CMC HV in HPHT Drilling

1. Strong High-Temperature Stability

CMC HV retains its viscosity and film-forming ability at temperatures up to 160°C. Even under prolonged exposure, it maintains filtrate loss below 5 mL/30 min at over 150°C, which reduces the need for frequent additive replenishment in high-temperature wells.

2. Superior Fluid Loss Control

CMC HV forms a dense and uniform filter cake (permeability <1×10⁻¹⁵ m²) that effectively blocks filtrate invasion and minimizes risks of well collapse or pipe sticking. Its performance lasts 2–3 times longer than that of conventional PAC or starch under HPHT drilling conditions.

3. Good Compatibility and Eco-Friendliness

CMC HV mixes well with PAC, starch, and clay without causing flocculation or precipitation. Derived from natural cellulose, it is biodegradable, non-toxic, and environmentally friendly, fully compliant with green drilling standards and sustainable energy development goals.

Application Tips for CMC HV

Recommended dosage: 0.2%–1.0% in water-based drilling fluids (0.8%–1.0% for 140–160°C wells).
Preparation: Dissolve in 20–30°C water at 300–500 rpm for 15–20 minutes. Avoid adding directly into high-electrolyte systems. For extreme conditions, combine with PAC LV at a 4:1–6:1 ratio to achieve optimal filtration control and fluid stability.

Zibo Hondo Chemical's Product Edge

Hondo CMC HV features an ash content below 0.5%, ensuring fast dissolution and high purity. It remains effective under 160°C and 120,000 ppm salinity, retaining over 88% viscosity after 72 hours at 150°C.
With proven performance in Middle Eastern, South Asian, and North African oilfields, our CMC HV is trusted by drilling companies worldwide for its reliability, quality consistency, and excellent high-temperature performance.

Conclusion

CMC HV provides stable and efficient fluid loss control in HPHT drilling operations. It helps reduce operational risks by 20–30% and increases drilling efficiency by 15–25%.
As a safe, eco-friendly, and high-performance additive, CMC HV is the ideal choice for modern high-temperature well drilling and sustainable oilfield operations.

Send Inquiry